now browsing by month
I’ve been looking all over the web for some low power low cost rack mount 1u servers that I can throw on ESX, be compatible, have them fit on a 2-post rack and properly connect to my FreeNas ISCSI server for shared storage. I’m not a fan of non-rackmount servers and I really didn’t want some deep pizza box that takes up a ton of room. I searched around the web for the perfect server and found it.
Although I heard a lot of people have issues with this server, I have not had any and it works great. If you have a specific purpose for it such as I have then it should be a nice cheap solution that works very well.
So let’s cut to the chase, what am I running my ESX hosts on?
- Server Bundle: ASUS RS100-X7 1U Server Barebone LGA 1155 Intel C202
- The server comes with 250W PSU, C202 Motherboard and a small case that fits perfectly in my 2-post Skeletek home rack. The MB has dual Intel NICs which I was looking for. You want to stay away from Realtek crap.
- CPU: 1 x Intel Xeon Quad-Core Processor E3-1230V2
- Memory:2 x Kingston 8GB DDR3 1333 2x4GB ECC KVR1333D3E9SK2/8G
- Total of 16GB. I didn’t need more and the cost wasn’t worth it for 8GB RAM sticks. Also, I heard that ASUS doesn’t support many 8GB RAM sticks for this mobo.
- Disk:Mushkin Enhanced Chronos MKNSSDCR60GB 2.5″ 60GB
- This SSD is used for the VMware ESX OS, some local ISO storage and 16GB host cache to improve performance if memory runs dry.
- OS:Vmware Vsphere ESX 5.0
- Everything is compatible and works like a charm.
Yes low power. And why low power you may ask? Because this NAS was meant to be in my house and the last thing I need is the additional heat and monthly power costs. So I built this system myself keeping low power in deep consideration. In addition, its a low noise system so I don’t have to listen to noisy fans running 24 hours a day such as you would hear in a typical data center.
The NAS was originally meant for my two Vmware ESX 5 hosts to connect to a shared storage via ISCSI so I can do things such as vmotion. But I also use it for other things such as CIFS and FTP. I use it as my main source of backup for all of my personal computers and I am able to achieve near gigabit speeds with CIFS and gigabit speeds using ISCSI. Its actually an amazing system for the low cost. For the quantity of virtual machines that I need to run, the system is sufficient, but as many of you know, I/O is the main factor for virtual machine performance due to the constant disk access.
CIFS performance shown below. This is a local copy of a Windows 7 ISO file to the FreeNas Server. As you see, I am getting 73.6 MegaBytes per second WRITE performance which is ultra fast for CIFS performance. In addition I also get 106 MegaBytes per second READ performance.
Some of you may be wondering what parts are used for my setup. Just keep in mind that I needed a system that was low power, low cost and low noise. This system was meant to run a maximum of 8 virtual machines spanned across these two ESX hosts.
- Rack: Skeletek C12U Rack Mount Frame with 24″ Base
- Server Case:AIC RMC-2A-0-2-R No Power Supply 2U Rackmount Chassis (Black) - 17″ deep !
- Motherboard:ASUS P8B-C/4L
- I chose this motherboard because I needed additional NICs dedicated for ISCSI and they needed to be PCIe based and INTEL. INTEL NICs are far superior to anything else, especially when they are onboard!
- CPU: Intel Xeon Quad-Core Processor E3-1230V2 3.3Ghz TDP of 69W
- Memory: Kingston ValueRAM 8 GB of (2 x 4GB) DDR3 PC3-10600 1333MHZ
- Power Supply: Athena Power AP-U1ATX50 20+4Pin 500W Single 1U EPS Server Power Supply
- PSU is a 80 Plus BRONZE
- Disks:(3) Western Digital WD Green WD20EARX 2TB 64MB Cache SATA 6.0Gb/s 3.5″
- These are the disks I used for actual storage in a raidZ. The motherboard supports (6) SATA2 3Gb/s so I have some room for expansion. The difference between 3 and 6 Gb/s is almost nothing so I still went with a 3 Gb/s motherboard.
- Disks:(2) ADATA S599 AS599S-40GM-C 2.5″ 40GB SATA II Internal Solid State Drive (SSD)
- I used these disks for the FreeNas Logs which improves performance.
- Motherboard:ASUS P8B-C/4L
- OS: FreeNas 8.3 booted on simple USB drive.
One of the things to note is that I had to disconnect the blower fan that came with the rackmount case due to the noise it made. It already had two large system fans and the temperature was ok without it.
So there you go. Using the (3) WD disks for storage I am able to use 3.6TB of data. I chopped about 600GB for ISCSI and the rest is used for normal data storage and backups.
One thing I must say is that this server is cheaper than a comparable QNAP rackmount server such as the TS-469U and it runs faster. The only benefit of the QNAP is that its all prebundled together and ready to use so your basically paying extra for the convenience. I have a friend who owns the TS-569 Pro and he gets 50-60 MB read and write performance.